Toilet Paper Holder SMILE

The smile-style toilet paper holder is a simple, modern design made from wood. Follow these clear steps to mount it securely on your bathroom wall.

Step 1: Mark the Drill Points

1. Hold the wooden toilet paper holder against the wall at the desired position.

2. Use a pencil to mark where the screw holes will go.

3. Check with a spirit level to make sure the holder is straight.

Step 2: Drill Holes & Insert Wall Plugs

1. Drill holes at the pencil marks.

2. Choose wall plugs according to your wall type:

   • Concrete or brick walls → use heavy-duty plugs.

   • Drywall/gypsum board → use drywall anchors.

   • Wooden walls → screw directly without plugs.

3. Insert wall plugs (dowels) into the drilled holes until flush.

Step 3: Attach the Wooden Holder

1. Place the wooden toilet paper holder against the wall, aligning with the drilled holes.

2. Insert screws through the holder into the wall plugs.

3. Tighten with a screwdriver until the wooden piece is secure.

Final Checks

• Ensure the wooden holder is firmly attached and does not wobble.

• Test by placing a toilet paper roll on the holder.

• Adjust screws if necessary.

More inspiration

Balance toys                     Headphone stand                Phone stand                   Table organizer

Bathroom hooks               Kids furniture                      Pickle triangle                Toilet paper holder 

Bathroom mirrors             Kids shelf                            Shelves                          Towel holder

Bathroom step stools       Kitchen organizer                Sofa arm tray                  Wine stand

Decorative wall                 Knife holders                        Spice rack                      Wooden shelf

Floating night stand          Metal shelf                           Standing night stand

Floating shelf                   Monitor stand                       Step stool