Toilet Paper Holder HONEYCOMB
This honeycomb-style toilet paper holder comes in two parts and is designed for modern, secure bathroom storage. Follow these step-by-step instructions for easy wall mounting.
Step 1: Mark the Drill Points
-
Hold the back part of the honeycomb holder against the wall at the desired height.
-
Use a pencil to mark the drill hole positions through the mounting slots.
-
Check with a spirit level to ensure alignment before drilling.
Step 2: Drill Holes & Insert Wall Plugs
-
Drill holes at the marked points.
-
Depending on wall type:
-
Concrete or brick wall → use strong wall plugs.
-
Drywall/gypsum board → insert drywall anchors.
-
Wooden wall → screw directly into the wall without plugs.
-
-
Push wall plugs (dowels) into the drilled holes until flush with the surface.
Step 3: Secure the Back Part
-
Position the back part of the honeycomb holder against the wall.
-
Insert the screws into the wall plugs.
-
Tighten with a screwdriver until the piece is firmly fixed.
Step 4: Insert the Metal Rods
-
Slide the metal rods into the designated slots of the back piece.
-
Make sure they are properly aligned and fully seated.
Step 5: Attach the Front Part
-
Position the front honeycomb panel over the mounted rods.
-
Push the panel until it fits snugly into place.
-
Check that the entire holder feels stable and secure.
Final Checks
-
Test by placing a toilet paper roll into the holder.
-
Make sure the front part doesn’t wobble and the rods hold firmly.
-
Tighten screws if needed.
More inspiration
Balance toys Headphone stand Phone stand Table organizer
Bathroom hooks Kids furniture Pickle triangle Toilet paper holder
Bathroom mirrors Kids shelf Shelves Towel holder
Bathroom step stools Kitchen organizer Sofa arm tray Wine stand
Decorative wall Knife holders Spice rack Wooden shelf
Floating night stand Metal shelf Standing night stand
Atstājiet savu komentāru